2. Remove the DC fan (80 square).
(1) Disconnect the harness from the connector (CN002) on the CN-3824 board.
(2) Remove the two screws, then remove the DC fan (80 square).
PSW3 x 30
PSW3 x 30
CN003
DC fan (80 square)
CN-3824 board
Label
Harness
Note
When attaching the DC fan, pay attention to the position of label and harness.
3. Install the removed parts by reversing the steps of removal.
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
4-10
To Next Page
Loading...
