Sony XVS-9000-C - Page 78

2. Remove the CN-3825 board.
(1) Open the clampers, then release the harnesses.
• XVS-8000/7000: four clampers, four harnesses
• XVS-6000: two clampers, two harnesses
(2) Disconnect the harnesses from the connectors on the CN-3825 board.
• XVS-8000/7000: four connectors (CN001, CN002, CN003, CN004), four harnesses
• XVS-6000: four connectors (CN001, CN002), two harnesses
(3) Remove the three screws, then remove the CN-3825 board.
XVS-8000/7000
XVS-6000
PSW3 x 6
Harness
Harness
Harness
CN001
CN003
CN004
CN002
Clamper
CN-3825 board
Clamper
Clamper
Clamper
PSW3 x 6
Harness
Harness
CN001
CN002
Clamper
CN-3825 board
Clamper
3. Install the removed parts by reversing the steps of removal.
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
4-20