Sony XVS-9000-C - Page 81

2. Remove the CN-4018 board.
(1) Open the six clampers, then release the six harnesses.
(2) Disconnect the six harnesses from the connectors (CN001 to CN006) on the CN-4018 board.
(3) Remove the three screws, then remove the CN-4018 board.
PSW
3 x 6
Harnesses
Clamper
CN002
CN003
CN001
CN004
CN005
CN006
Clampers
CN-4018 board
Clamper
Clampers
Harnesses
Harness
Harness
3. Install the removed parts by reversing the steps of removal.
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
4-23