Help Guide
Digital Camera
ZV-1F
Focus Standard
If you press the key to which [Focus Standard] is assigned, you can recall useful functions such as moving the focusing
frame quickly, etc. depending on the focus area settings.
Examples of [Focus Standard] key functions
When [
Focus Area] is set to any of the following parameters, pressing the key enables you to move the focusing
frame using the top/bottom/left/right side of the control wheel.
[Zone]
[Spot: S]/[Spot: M]/[Spot: L]
[Expand Spot]
When [
Focus Area] is set to [Wide] or [Center Fix], pressing the key in the autofocus mode makes the camera
focus on the center of the screen.
Hint
If you press the key to which [Focus Standard] is assigned when [
Focus Mode] is set to [Manual Focus], the screen for
manual focusing operations will appear.
Note
You cannot set the [Focus Standard] function to [Left Button] or [Right Button].
Related Topic
Assigning frequently used functions to buttons (Custom Key Setting) (still image/movie)
Selecting the focus area (Focus Area)
5-041-856-11(1)
Copyright 2022 Sony Corporation
MENU →
(Setup) → [Operation Customize] → [ Custom Key Setting] or [ Custom Key Setting] →
desired key, then assign the [Focus Standard] function to the key.
1
Press the key to which [Focus Standard] is assigned.
What you can do by pressing the key varies depending on the setting for [
Focus Area].
2
To Next Page
