Help Guide
Digital Camera
ZV-1F
Focusing using touch operations (Touch Focus)
[Touch Focus] allows you to specify a position where you want to focus using touch operations. Select MENU →
(Setup) → [Touch Operation] → [Touch Operation] → [On] beforehand.
This function is available when [
Focus Area] is set to one of following parameters:
[Wide]
[Zone]
[Center Fix]
Specifying the position where you want to focus in the still image mode
When performing auto-focusing, you can specify the position where you want to focus using touch operations. After
touching the monitor and specifying a position, press the shutter button halfway down to focus.
Specifying the position where you want to focus in the movie recording mode (Spot focus)
The camera will focus on the touched subject.
Hint
In addition to the touch focus function, touch operations such as the following are also available.
The focusing frame for [Spot] and [Expand Spot] can be moved by dragging.
When [
Focus Mode] is set to [Manual Focus], the focus magnifier can be used by double-tapping the monitor.
Note
The touch focus function is not available in the following situations:
When [
Focus Mode] is set to [Manual Focus]
When using the digital zoom
Related Topic
Touch Func. in Shooting
MENU →
(Setup) → [Touch Operation] → [Touch Func. in Shooting] → [Touch Focus].
1
Touch the monitor.
Touch the subject to focus.
To cancel focusing with touch operations, touch
(Touch focus release) icon or press the center of the control
wheel.
1.
Press the shutter button halfway down to focus.
Press the shutter button all the way down to shoot images.
2.
Touch the subject on which you want to focus before or during recording.
To cancel spot focus, touch
(Touch focus release) icon or press the center of the control wheel.
1.
To Next Page
Loading...
