AP 50
Scope of supply
Mounting instructions
The Sophos AP 50 can be mounted on the wall. Screws are not included in delivery.
Only use screws whose dimensions correspond with the mounting holes on the back
side.
Controls
Power (LED display)
Off Power off
On continuously Power on
Blinking rapidly Firmware update
Blinking slowly No connection to the Sophos UTM
LAN connection (LED display)
On continuously Network connection, no activity
Blinking Network activity
Wireless LAN access with 2.4 GHz (LED display)
On continuously Network connection, no activity
Blinking Network activity
Wireless LAN access with 5 GHz (LED display)
On continuously Network connection, no activity
Blinking Network activity
Interfaces and buttons
WPS button
Currently not supported
OI Power on/off switch
DC 12V IN Power
Reset Currently not supported
PoE/LAN 10/100/1000 Base-TX interface
10/100/1000 Base-TX
Reset
Power
Power on/off switch
AP 50
Sophos AP 50 Security Notes Power-over-Ethernet (PoE)
injector + power cord
2 Detachable dipole antenna Ethernet cable