► Read the installation instructions before connecting the PoE-Injector to its power
source.
► Follow basic electricity safety measures whenever connecting the PoE-Injector to
its power source.
► A voltage mismatch can cause equipment damage and may pose a fire hazard. If
the voltage indicated on the label is different from the power outlet voltage, do not
connect the PoE-Injector to that power outlet.
Regulatory Information for Europe
Declaration of Conformity with Regard to the EU Directive
1999/5/EC (R&TTE Directive)
This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC (R&TTE). For equipment operating in the 2.4GHz
frequency band, the following standards were applied:
► Radio: EN 300 328
► EMC: EN 301 489-1, EN 301 489-17
► Safety: EN 60950-1
For equipment operating in the 5GHz frequency band, the following standards were
applied:
► Radio: EN 301 893
► EMC: EN 301 489-1, EN 301 489-17
► Safety: EN 60950-1
The full declaration of conformity for this product is available at:
http://www.sophos.com/en-us/support/knowledgebase/6300/2450/6350/117713.aspx
Although Norway, Switzerland and Liechtenstein are not EU member states, the EU
Directive 1999/5/EC has also been implemented in those countries.
National Restrictions
Within the EU as well as within the majority of the other European Countries, the 2.4
and 5GHz frequency bands have been made available for the use of Wireless LANs.
Sophos recommends that you check with the local authorities for the latest status of
their national regulations for both the 2.4 and 5GHz frequency bands.
To Next Page
Loading...
Need help?
General
