Sorel TDC 4 - Hydraulic Variants

7
Description of controller
2 2
2.5 Hydraulic variants
The following illustrations should be viewed only as schematic
diagrams showing the respective hydraulic systems, and do not
claim to be complete. The controller does not replace safety de-
vices under any circumstances.
Depending on the specic application, additional system components and
safety components may be mandatory, such as check valves, non-return
valves, safety temperature limiters, scalding protectors, etc., and must
therefore be provided.
Caution
1
3
5
2
4
7
10
13
6
8 9
11 12
14
(∆T controller)
15
(2x∆T controller)
∆T 2x∆T