SV3
Pro Hi-Definition Wireless
On-Ear Headphones
User Manual
2
To answer a call, press the multifunction button or use the keys on the
phone.
To reject the call, press and hold the multifunction button for about 1
seconds.
To end a call, press the multifunction button or use the keys on the phone.
Note: If you receive or make a call while listening to music, the music will stop
automatically until the call is ending. To pause or resume playing, press the
multifunction button. To stop playing music, press the multifunction button again.
3
4
BUTTON FUNCTION CHART (BLUETOOTH SOURCE)
FUNCTION BUTTON
SYMPTOM SOLUTION
OPERATION
Turn On
Turn Off
Answer Call
End Call
Refuse Call
Last Call Redial
Volume Up
Forward track
Volume Down
Backward track
Pair
Multifunction Button
Multifunction Button
Multifunction Button
Multifunction Button
Single Press
Single Press
Single Press
Single Press
Single Press
Double Press (quickly)
Multifunction Button
Multifunction Button
Multifunction Button
Multifunction Button
Multifunction Button
Volume up button
Volume up button
Volume down button
Volume down button
Press and hold
(Approximately 4s)
Press and hold (Approximately 6s)
LEDs are not lighting up
Unable to Pair with
Bluetooth devices
Hearing Distortion
Press and hold
(Approximately 3s)
Press and hold (Approximately 1s)
Press and hold
Single Press
Press and hold
Pause（Music Mode）
Play（Music Mode）
TROUBLE SHOOTING
See below for solutions to common problems.
Power button is not turned on. The battery is out of power.
Charge your device.
Confirm that your phone/music player is Bluetooth
compatible.
Failed to pair successfully within 3 minutes. Please repeat the
pairing procedure.
Make sure the input password is correct if required.
Lower Volume on your phone/music player/device. Charge
your device.
Don’t turn on too many headsets and Bluetooth devices at the
same time when connecting. Please turn off other headsets
and turn on the paired headset in order to avoid interference.
Make sure the blue LED is flashing quickly(under pairing
mode)
Clear the pairing list on your phone and try again.
SAFETY INFORMATION
Follow these tips and safety instructions to preserve the operational lifespan of
your Bluetooth Stereo Headset:
SPECIFICATIONS
Bluetooth 4.0 + EDR
Handsfree Profile (HFP) for talking and operating the
phone
Advanced Audio Distribution Profile (A2DP) for audio
streaming
Audio Video Remote Control Profile (AVRCP) for music
control
Call time up to 12 hours, music time up to 10 hours (Varies
by volume level and content)
Up to 15 days
Approx. 3 hrs from empty to full charge
33 ft (10m)
Omni-directional
Lithium ion polymer
Bluetooth® Version:
Bluetooth® Profiles:
Battery Life:
Standby Time:
Charging Time:
Bluetooth® Range:
Microphone:
Battery Type:
1
2
Do not use this headset in extreme temperatures. Keep away from extreme
hot, cold, dry, or damp areas. Also keep away from water, fire, and
radiation.
It is recommended that you allow the battery to fully charge before using the
device for the first time. (approximately 3 hours. Do not recharge
unattended for longer than 8 hours
)
The effective range for this wireless device is 10 Meters. Performance may
be affected by distance and interference from other devices or conditions
within the operating environment.
Barriers and other wireless devices may affect the performance of headset.
Check the laws and regulations on the use of mobile phones and
hands-free equipment in areas you intend to use this product.
3
4
5
Compliance with FCC rules (U.S.A., only)
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING
• Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
• Proper connections must be used for connection to a host computer
and/or peripherals in order to meet FCC emission limits.
WARNING
5
1
2
Permanent hearing damage or hearing loss may occur if earphones are used at
a high volume. Hearing experts suggest not continuously listening to music at a
high volume. If you hear a “hissing” noise in your ears, or if you experience
discomfort, lower the volume, or temporarily discontinue use of this product until
discomfort subsides.
Do not disassemble your Bluetooth Stereo Headset.
Do not allow young children to use your Headset unsupervised.
Observe all signs and instructions that require an electrical device or radio
product to be switched off in designated areas, such as petrol/refueling stations,
hospitals, blasting areas, potentially explosive atmospheres or aircraft.
Do not use or connect adaptors and/or chargers to this product that are not
approved of or specified in this quick start guide.
3
4
!
To Next Page
Need help?
General
