Main earbud is paired
with mobile phone
Main earbud is
disconnected with mobile
phone
1.10 2.11 Entertainment Mode
1.14 2.17 Earbud fixed ringtone
Code Status Voice&Prompt Indicator Light
3.1 Power off Power On Blue light on for 1 second
3.2 charging Power On Blue light on for 1 second
According to the status, the
corresponding prompt
According to the status, the
corresponding prompt
in shutdown status Pairing Mode
Blue and white lights flash
alternately slowly
After a short beep, activate the voice
assistant sound
After a short beep, turn off the voice
assistant sound
3.7 Connection Status Entertainment Mode No light
3.8 Connection Status Normal Mode No light
When the call is
not connected
3.10 in calling status call end No light
When the call is
not connected and
the three-way call
Cancel dial: beep
Apple mobile phone no sound
3.14 Three-way calling / No light
3.15 Three-way calling / No light
Bluetooth Name：SOUL S-LIVE30
2.Voice prompt (English voice)
(TWS is connected, the master earbud is
connected to the mobile phone)
The blue and white lights of the main and
auxiliary earbud flash alternately quickly
earbuds and mobile phone pairing status
The blue and white lights of the main earbud
flash alternately slowly, and the auxiliary
earbud has no lights
Pairing time (mobile phone)
If there is no connection within 5 minutes,
the earbud will automatically shut down
When making an call (not answered)
white light of main and auxiliary earbud will
be on for 1 second
white light of main and auxiliary earbud is
always on
white and blue light of earbud will flashes
once
Alarm when battery is lower than 3.5 V
(Note: After the low power reminder, you can still
listen to music for 15 minutes)
Beep once every 2 minutes
3.Function operation instructions
Manual pairing and power on
For the main and auxiliary earbud, press and hold the power button for 3 seconds, the two earphones will automatically enter the TWS
search pairing mode (the blue and white lights flash alternately), and then automatically complete the TWS connection; the main
earphone will automatically enter the mobile phone pairing mode (alternate blue and white lights). there is no light on the auxiliary
earbud. If the primary and secondary devices fail to reconnect in time (more than 10 seconds), user need to click the power button to
make the earbud into TWS reconnection mode.
(Note: If the primary or auxiliary earbud has never been connected in TWS mode, and the auxiliary earbud has been connected to the
second mobile phone alone, user need to clear the pairing record before connect it to the primary earbud normally.)
Automatic power-on pairing
Open the charging case and take out the earbuds, the two earbuds will automatically enter the TWS search pairing mode (the blue and
white lights flash alternately quickly), and then automatically complete the pairing of the earbuds; the primary earbud will
automatically enter the mobile phone pairing mode (the blue and white lights flash alternately slowly), the secondary earbud with No
lights. If the primary and secondary earbuds fail to reconnect in time (more than 10 seconds), user need to click the power button to
make the earbud into TWS reconnection mode.
(Note: If the parimary or auxiliary earbud has never been connected in TWS mode, and the auxiliary earbud has been connected to the
second mobile phone alone, user need to clear the pairing record before connect it to the primary earbud normally.)
Take out any earphone separately from the charging case. If the other earphone is not taken out within 30S, the first earphone will
automatically connect back to the mobile phone. If there is no connection record, it will automatically enter the pairing mode.
For the primary or secondary earbud, press and hold the power button for 5 seconds to enter pairing mode. If the other earphone is not
taken out within 30S, the first earphone will automatically connect back to the mobile phone, if there is no connection record, it will
automatically enter the pairing mode
Turn on IOS voice assistant(SIRI & Google
Assistance
Quickly press the left earphone power button three times (after Siri is activated, user can only speak one sentence, then user have to
manually click the phone voice, otherwise siri will be automatically turned off)
Turn off IOS voice assistant(SIRI & Google
Assistance
Press the left earphone power button (Apple system only)
Turn on entertainment mode (low latency)
Press and hold the power button of the left earphone for 1S, and release it when you hear the voice prompt "Entertainment Mode"
Turn off entertainment mode (low latency)
Press and hold the power button of the left earphone for 1S. When you hear the voice prompt "Normal Mode", release it and start it
Press the right earphone power button once
Press the left earphone power button once
Double-click the right earphone power button
Click the MFB button of the right earphone to cancel the dialing before the other party answering the call
During a call, long press the MFB button of the right earphone for 2S to switch the call voice between the earphone and the mobile
phone
Three-way call 1, hang up the current call to
answer a new call
When there is a new call during calling, click the MFB button of the right earphone to hang up the current call and answer the new call.
This function requires the support of the mobile phone.
Three-way call 2, keep the current call and
answer the new call
When there is a new call during calling, triple-click the MFB button of the right earphone to keep the current call and answer the new
call. This function needs to be supported by the mobile phone.
Pay attention to light
requirements.
After the phone is connected,
the earbud will no longer have a
light signal. Playing music and
incoming calls, etc., the
indicator lights are all in a no-
light state.
S-LIVE30（AD6976D Chipset）
Operation Instruction
Blue light is on for 1 second
To Next Page
Need help?
General
