03 EN
• Each time you power on your Soundcore earbuds, they will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
• Mono mode: When Bluetooth connected, you can use either one of the
earbuds only by placing the other one into the charging case.
• When powered on and connected, if either one of the earbuds is out of
battery and powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case,
and the microphone in the other earbud will be activated.
Controls
Play/Pause Press twice (R)
Next track Press twice (L)
Volume up Press once (R)
Volume down Press once (L)
ANC Press and hold for 2 seconds(R/L)
Answer a call Press once(R/L)
End a call Press twice(R/L)
Reject a call Press and hold for 2 seconds(R/L)
Mono Mode
Play/Pause
Press twice
End a call
Volume Up
Press once
Answer a call
Reject a call
Press and hold for 2 seconds
Activate Siri or other voice assistant
software
To Next Page
Loading...
