SoundCraft Vi Series User Manual

Vi V4.5 Quickstart Guide.doc Page 6
Identifying the HiQnet Network connector on Vi consoles
Vi1
The HiQnet port is on the rear of the control surface, adjacent to the rear USB
sockets.
Important! The HiQnet port on early Vi1 consoles (serial numbers lower than
30210956) is only able to drive short cable lengths, max recommended length 1
metre (3 feet). Therefore use a network switch positioned close to the rear of the
console to extend the cable length if required.
Vi2 / 4 / 6
The HiQnet port is located on the rear of the Control Surface, adjacent to the MIDI
ports. The port is capable of driving standard Ethernet distances of up to 100m.

SoundCraft Vi Series Specifications

General

Category	Digital Mixer
Input Channels	Up to 64
Output Busses	Up to 32
EQ	4-band parametric per channel
Connectivity	MADI, AES/EBU
Remote Control	iPad app available
Digital I/O	MADI, AES/EBU
Display	Touchscreen
Series	Vi Series