DAB112 / English Instruction Manual
4
SAVING STATIONS (PRESET STORE). IN DAB+
1. Set the station that you wish to save.
2. Press and hold “MENU/INFO” button to open system menu, select “system” and confirm
with “SCAN/SELECT”.
3. Use “ ” to select “Preset Store” and confirm with “SCAN/SELECT”.
4. Use “ ” to select the desired memory preset and confirm with “SCAN/SELECT”.
“Preset (number) stored” appears briefly in the display which then returns to the DAB or FM
mode.
Note: You have a choice of 40 memory presets.
CALLING UP SAVED STATIONS (PRESET RECALL) IN DAB+
1. Press and hold “MENU/INFO” button to open system menu, select “Preset Recall” and
confirm with “SCAN/SELECT”.
2. Use “ ” to select the desired station and confirm with “SCAN/ SELECT”.
The display will jump back to DAB+ or FM mode.
Memory “P01” will be shown on the display.
FM
SELECTING THE OPERATING MODE
Briefly press the “ /MODE” button repeatedly to switch between the DAB, FM radio and BT
(Bluetooth
®
) modes.
TUNING IN FM MODE
Switching to FM mode will automatically retrieve the station last selected. If that station cannot
be received at that time, then the device will automatically search for the next station which can
be received.
Briefly press “ ” to search for a station in 0.05 MHz steps.
Press and hold “ ” to start a station scan.
The scan stops once the first receivable station is located.
In the system menu under “Scan Setting” you can select whether “All Stations” or only
“Strong Stations” will be included.
SAVING STATIONS (PRESET STORE). IN FM
Same as “DAB+”
CALLING UP SAVED STATIONS (PRESET RECALL) IN FM
Same as “DAB+”
To Next Page
Loading...
