SOUNDMASTER DAB112 - Alarm and Sleep Timer Functions; Setting the Alarm Function; Configuring the Sleep Timer; System Settings and Configuration

DAB112 / English Instruction Manual
6
ALARM AND SLEEP FUNCTION
ALARM FUNCTION
Here you can preselect a time for the device to wake you.
1. Press and hold “MENU/INFO” button to open system menu, select “system” and confirm
with “SCAN/SELECT”.
2. Use “ ” to select Alarms and confirm with “SCAN/SELECT”.
3. Use “ ” to select Alarm 1 or Alarm 2 and confirm with “OK”.
4. Use” “to select Alarm and use “SCAN/SELECT” to switch
between On and Off.
5. Use” ” to select Time and confirm with “SCAN/SELECT”.
6. Use “ ” and to set the hour and the minute, then
confirm each with “SCAN/SELECT”.
7. Use” “to select Source and confirm with “SCAN/SELECT”.
8. Use “ ” to select between FM, DAB and Buzzer
and confirm with “SCAN/SELECT”.
9. Use” “to select Repeat and confirm with “SCAN/SELECT”.
10. Use “ ” to select between Once, Daily,
Weekends and Workday and confirm with “SCAN/SELECT”.
11. Use “ ” to select Volume and confirm with “SCAN/SELECT”.
12. Use “ ” to select duration and confirm with “SCAN/SELECT”.
13. Quit the menu with “MENU/INFO” button.
The alarm symbol 1 or 2 lights up in the display.
14. Switch the device to standby with “ /MODE” if necessary.
The selected alarm signal will sound at the set time.
➢ Press any button to snooze the alarm 5 minutes. (Except Flash light and SOS buttons)
Display will show snooze timing counter.
➢ Press “ /MODE” to deactivate the alarm signal completely.
SLEEP FUNCTION
Here you can pre-select a time after which the device switches off automatically.
1. Press and hold “MENU/INFO” button to open the system menu, select “system” and confirm
with “SCAN/SELECT”.
2. Use” ” to select Sleep and confirm with SCAN/SELECT.
3. Use “ ” to select between 15 > 30 > 45 > 60 > 75 > 90 minutes and Off.
4. Briefly press “SCAN/SELECT” to confirm.
The display shows “SXX” and “XX” means remaining sleep time.
SYSTEM SETTINGS
SETTING THE TIME/DATE MANUALLY
If you do not have any DAB+ reception, you can also configure the time and date manually.
1. Press and hold the “MENU/INFO” button to open the system menu, select “system” and
confirm with “SCAN/SELECT”.
2. Use “ ” to select “Time/Date” and confirm with “SCAN/SELECT”.
3. Use” ” to select “Set Time/Date” and confirm with “SCAN/SELECT”.
4. Use “ ” to set Day – Month – Year – Hour –