Find the system settings.
BLUETOOTH®
If you are using a Bluetooth audio device, make sure the working distance is within 10 meters. Different environment
may have effect on the working distance.
1. Select the mode “Bluetooth” (“Bluetooth pairing” is shown in the display).
2. Activate the Bluetooth function on your Bluetooth device and select “DAB80”. When the connection was
successful the display show “Bluetooth Connected”.
3. Press the “▶Ⅱ ” button to start or pause the playback.
4. Press the to skip to the previous or next track.
This unit contains also a hands-free function. This function is only available in Bluetooth® mode. If you have
connected a mobile phone by Bluetooth and you get a call, press the “Enter” button to pick-up the call. To hang-up
the call, press long the “Enter” button. To reject the call, press and hold the “ Enter” button during ringing.
AUX
1. Select the mode “Aux” (“AUX IN” is shown in the display).
2. Connect your external device with an Aux cable with Aux jack at the backside of the unit (Therefore you have to
open the phone compartment door).
3. Start the playback on your external device.
EQUALIZER
Press in on mode the “AMS | NAP | EQ” button and select with one of the installed sound settings: Flat,
Rock, Pop, Jazz, Classic. With the setting “My EQ” there is the possibility of a personal sound setting (treble, bass).
NAP
When stay on standby mode, press “AMS | EQ | NAP”, the display show NAP Timer < Off>. Press the button
repeatedly to select the desired time 10, 15, 30, 45, 60, 90, 120, Off and press “Enter” to confirm.
DISPLAY DIMMER
In on mode, press repeatedly the “Light | Dimmer” button to adjust the display backlight.
LED LIGHT
Press and hold in standby or on mode the “Light | Dimmer” button to switch on or off the LED light. NOTE: To avoid
eye damage you will not see directly into the light while the LED is on.
SYSTEM SETTINGS
In standby mode, press and hold the “Info | Menu” button until the display show “Standby <System>” and press
“Enter” to confirm. Select with the desired function.
Sleep
Select the function “Sleep” in the main menu. Choose from Sleep OFF, 15 mins, 30 mins, 45 mins, 60 mins or
90 mins. NOTE: This function is only adjustable in on mode!
Time
Select the function “Set Time/Date”, “Auto update”, “Set 12/24 hour”, “Set date format” to adjust the time and
date settings.
Language
Adjust the desired menu language.
Factory Reset
To Next Page
Loading...
