Why does my SOUNDMASTER Media Player switch off automatically?
Your SOUNDMASTER Media Player automatically switches to standby mode if no music is played for more than 15 minutes due to ErP2 requirements and environmental protection.
Why is my USB drive or MP3 player not detected on SOUNDMASTER Media Player?
If your USB drive or MP3 player is not being detected by your SOUNDMASTER Media Player: 1. Ensure that the USB drive or MP3 player is properly plugged in. 2. If using a USB hard disk, ensure it has an external power supply. 3. If your MP3 player is not directly readable, use a USB drive instead.
What to do if wired connection cannot be established on SOUNDMASTER ICD2020 Media Player?
If a wired connection cannot be established on your SOUNDMASTER Media Player, check the availability of the LAN network on the access point. Reconnect or replace the LAN cable.
How to fix burbling or intermittent DAB on SOUNDMASTER ICD2020 Media Player?
To resolve issues with DAB mode on your SOUNDMASTER Media Player, try moving the radio. You can also rescan for local stations (high-strength) only and check the local DAB coverage.
What to do if the alarm does not work on SOUNDMASTER ICD2020 Media Player?
If the alarm on your SOUNDMASTER Media Player is not working: 1. Ensure that the alarm is switched on. 2. Check the volume settings, referring to solutions for 'No sound' if needed. 3. If the alarm source is set to a station, but there is no network connection, change the alarm source or reconfigure the network connection.
Why won't my SOUNDMASTER ICD2020 connect to WiFi?
If your SOUNDMASTER Media Player won't connect to WiFi, check the availability of the WLAN network on the router. Try placing the device closer to the router and ensure that you are using the correct password.
How to establish a network connection on SOUNDMASTER ICD2020 Media Player?
To establish a network connection on your SOUNDMASTER Media Player: 1. Check the LAN cable or the WLAN function. 2. Try setting a static IP address on the device. 3. Activate the DHCP function on your router and try connecting again. 4. If a firewall is active, configure it to allow access for the device. 5. Reboot the router.
What to do if my SOUNDMASTER ICD2020 Media Player does not switch on?
If your SOUNDMASTER Media Player does not switch on, check that the power adapter is properly connected.
Covers placement, power, cable safety, repair, lightning, children, flames, shipping, ESD, and long-term storage guidelines.
Details cleaning, heat, ventilation, location, interference, and operating environment requirements.
Highlights Laser Product warnings and advice to prevent hearing damage from high volume.
Details controls on the front panel: USB port, headphone socket, display, navigation, power, and menu buttons.
Details buttons on the top panel: MENU, INFO, PRESET, BACK, PLAY/PAUSE, and PAIR/BACK functions.
Covers ON/STANDBY, INTRO/AMS, and source selection buttons for the remote.
Details REPEAT, EQ, BASS/TREBLE, and USER mode selection buttons on the remote.
Covers MENU, navigation (up/down), and OK/selection buttons for remote operation.
Covers stop, skip, fast forward/backward, and next/previous track buttons on the remote.
Details numeric keys, INFO, RADIO, SLEEP, source, RANDOM, and PROGRAM buttons on the remote.
Covers PAIR, Mute, CLOCK, VOLUME, and TIMER buttons for device management.
Describes connecting power and preparing the wireless network for initial device setup.
Outlines the available main menu modes and an overview of system settings.
Explains the step-by-step process of the setup wizard for initial configuration.
Covers selecting the user interface language and the preferred time display format.
Details automatic updates, time zone settings, daylight saving, and manual time/date configuration.
Covers scanning for networks, selecting the WLAN region, and initiating connection.
Guides users on entering the Wi-Fi password using the device's navigation controls.
Explains connecting to a network using Push Button, Pin, or Skip WPS options.
Describes the outcome of network setup and how to exit the wizard interface.
Covers connecting to a network using the wizard or the Push Button Configuration method.
Describes how to check active connection status, MAC address, IP address, and other network parameters.
Covers selecting the optimal WLAN region and configuring manual network connection parameters.
Details managing saved wireless networks, including viewing and deleting entries.
Explains the feature to maintain Wi-Fi connection even when the device is in standby mode.
Covers setting the current time and date, and adjusting the display backlight brightness.
Covers changing the device's user interface language from the available options.
Guides users on how to check for, download, and install software updates for the device.
Describes how to access and view the device's firmware version and radio identification number.
Explains the functionality and connection process for accessing internet radio stations.
Details how to select previously played internet radio stations from a list.
Covers navigating station lists by category, location, genre, and using keyword search.
Explains managing favorite stations and adding new ones via the internet radio portal registration.
Guides users on registering their device and accessing the internet radio portal for station management.
Details how to save and select favorite internet radio stations using preset memory slots.
Explains how to view detailed information about the currently playing internet radio stream.
Lists the audio file types (MP3, WMA, WAV, AAC, FLAC, ALAC) supported by the media player.
Explains how to play music files from shared media servers on the local network via UPnP.
Covers the Prune Server function and playing audio files directly from a USB device.
Details Repeat/Shuffle playback modes and viewing current track information with a progress bar.
Introduces DMR and DLNA streaming concepts for music playback and control.
Guides on setting up media sharing from a PC using Windows Media Player for DLNA.
Describes using Windows Media Player for remote control of music playback.
Explains using DLNA apps like iMediaShare for controlling playback on mobile devices.
Explains DAB/DAB+ reception and the process of scanning for available radio stations.
Discusses factors affecting station availability and reception quality, including signal strength.
Covers manual scan options (full, local) and removing unavailable stations from the list.
Details saving/recalling DAB presets and viewing current station broadcast information.
Explains how to adjust dynamic range compression settings for audio output.
Covers full scan, manual scan, and fine-tuning FM frequencies with RDS information display.
Details saving/recalling FM presets and viewing station broadcast information via RDS.
Covers adjusting scan behavior to stop only at stations with good signal strength.
Covers selecting mono playback for weak FM reception to reduce hiss.
Provides important warnings and notices regarding the correct usage of the CD player.
Details basic playback functions: play, pause, next, previous, fast forward/backward, stop, and eject.
Covers programming tracks for custom playback order and utilizing the shuffle mode.
Explains how to repeat a single track or all tracks on the CD, and how to cancel repeat mode.
Describes how to set and activate the sleep timer for automatic system shutdown.
Guides on setting up and configuring wake-up alarms with various modes and frequencies.
Explains how to connect headphones to the 3.5mm jack for private listening and muting speakers.
Details how to perform a factory reset and the consequences for settings and presets.
Addresses issues like the device not switching on, no sound, or automatic power-off.
Covers network connectivity, no station found, FM hiss, and DAB reception problems.
Addresses alarm malfunctions and other miscellaneous operational problems.
Covers USB device detection issues and NetRemote connectivity problems.
Addresses system malfunctions due to data processing or electromagnetic interference.
General| Tuner type | - |
|---|---|
| Supported radio bands | DAB+ |
| Optical drive type | Player |
| Disc types supported | CD, CD-R, CD-RW |
| Cassette deck | No |
| RMS rated power | 15 W |
| Number of built-in speakers | 2 |
| Built-in display | Yes |
| Control type | Rotary |
| Product color | Stainless steel |
| Bluetooth version | 2.1+EDR |
| Headphone outputs | 1 |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 225 mm |
|---|---|
| Width | 373 mm |
| Height | 950 mm |
To Next Page
