SOUNDMASTER ICD2080 - Alarm; Aux in; Bluetooth; Sleep

ICD2080 / English Instruction Manual
17
• Settings
Scan settings
Choose FM at first, it will go to a specific station playing. Then press “MENU” on the radio to
get above table.
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations. To change the scan settings to stop only at stations with
good signal strength, select “Yes” after choosing Strong station only.
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss). To play weak stations in mono, select FM weak reception: Listen
in mono only and then YES.
BLUETOOTH
®
The Bluetooth
®
function is only an input function. It is not possible to connect Bluetooth
®
devices
(e.g. speakers, headphones) to it!
When you select the Bluetooth mode, the device is entering to
pairing and the BT icon at the bottom of the screen will flash.
Turn on your smartphone, tablet or other Bluetooth devices to search
for the device.
The Bluetooth pairing name is “ICD2080”.
When pairing is successful, the Bluetooth indicator will light up and
stop flashing.
To release BT pairing, turn off or unpair your smartphone, table or
other Bluetooth devices.
Press “ ” on the radio or Remote control to start or pause the playback. You can press “ ”
or “ ” on the radio or remote control to play the previous or next track.
AUX IN
Connecting DVD player / Set-Top Box / TV outputs to analogue inputs from the sound board.
Use a RCA audio cable to connect the DVD player/TV outputs with the AUX (L/R) input socket
from the sound board.
SLEEP
To set the sleep timer, press “SLEEP” on the unit or remote control. Choose from Sleep OFF,
15mins, 30mins, 45mins or 60mins.
Once you select a sleep period, the system returns to the “Now playing” screen.
If you go under Main Menu to Sleep press “MENU” on the unit or remote control to return to the
“Now playing” screen.
ALARM
There are two versatile wake-up alarms with snooze facility, and a
sleep function to turn the system off after a set period. Each alarm
can be set to start in a particular mode.
Select Alarm under Main menu to set or change an alarm.