MCD400 / English Instruction Manual
3
ALARM
Setting of the alarm time
The system must be in standby mode in order to set the alarm.
You have the option of setting two alarm times. Proceed as follows:
1. Press the “VOLUME- / ALARM 1” button for about 3 seconds. The hours of the currently set
alarm time will start to flash.
2. Perform the settings with the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons.
3. Press the “VOLUME- / ALARM 1” button to confirm. The minutes will start to flash.
4. Perform the settings with “SKIP+ / TUNING+” & “SKIP- / TUNING-” button.
5. Press the “VOLUME- / ALARM 1” button to confirm. Then choose how you would like to be
woken up. Perform the settings with the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons.
Press the “VOLUME- / ALARM 1” to confirm.
The selection is as follows:
• FM: As soon as the set alarm time has been reached, the radio will turn on. The last preset
station will play.
• DAB: As soon as the set alarm time has been reached, the radio will turn on. The last
preset station will play.
• CD: As soon as the set alarm time has been reached, the device will turn on in CD mode.
The inserted CD will be played from the first track.
• USB: As soon as the set alarm time has been reached, the device will turn on in USB mode.
The tracks of the connected storage device will be played from the first track.
• BUZZ: A buzzer will sound when reaching the alarm time.
6. Finally, press the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons to set the alarm volume.
Press the “VOLUME- / ALARM 1” to confirm.
To set the second alarm time, repeat each of the above steps with the “VOLUME+ / ALARM 2”
button.
Deactivate the alarm
Press “VOLUME- / ALARM 1” or “VOLUME+ / ALARM 2” shortly to choose “Alarm off”.
Snooze
The automatically set alarm function can be switched off for 9 minutes with the “SLEEP /
SNOOZE” button.
SLEEP TIMER
Press the “SLEEP / SNOOZE” button shortly to adjust the sleep timer in 10 minutes steps from
120 minutes to 10 and 5 to OFF.
DAB
Select the DAB mode with the “STANDBY / FUNCTION” button, until “DAB” is shown in the
display.
The radio will automatically do a full scan of DAB+ stations. The list of stations is then stored,
eliminating the need for another full scan when the radio is turned on next time. When the scan
is complete, the stations are stored in alphabetical order. The first available station will be
played back.
To Next Page
Loading...
