SOUNDMASTER PL525 - Remote Control Functions; Battery Replacement; Button Descriptions

PL525 / English Instruction Manual
1
REMOTE CONTROL
Battery replacement
The battery compartment is located on the back of the remote control.
1. Remove the battery compartment door by pressing in on the tab and lifting it off.
2. Insert one (1) CR2032 size batteries into the battery compartment following the polarity
markings inside the battery compartment.
3. Replace the battery compartment door.
Button description
1. FUNC“
Press to select the functions
(Phono/USB/Aux/Radio)
2. On/Standby
Press to switch on/standby the
system
3. Skip up
/ down
Select next / previous track
Tuning up / down in Radio mode
4. FOLDER/PRESET
▲/ ▼
Press to skip up/down the album
Press to up / down Preset
5. REP/INTRO/RAN
Press to active repeat /intro/
random function for USB playback
6. DISPLAY
Press to display difference
information of the system
7.
In encoding mode : press to active
track separation function
8. VOLUME -/+
Press to adjust volume level up/
down
9. REC
Press to encode the tracks in the
MP3 format
10. Play/pause
ST / MONO
Press once to start USB playback. Press once again to pause play
temporarily
11. Stop
In USB mode : press to terminate playback or cancel programmed
memory.
12. INFO/DELETE
In MP3 playback mode : press to active ID3 function
In USB mode : press to active file delete function
13. MEN/CLK-ADJ
In USB mode : press to active tracks program function
In standby mode : press to adjust clock
14. SLEEP/TIMER
In on mode : press to active sleep function
In standby mode : press to set the alarm on/off time and active/de-
active alarm function
15. EQ
Press to select different EQ mode