Need help?Do you have a question about the Soundstream D200 II and is the answer not in the manual?
Power| idle current draw | 0.2 Amps |
|---|---|
| maximum current draw | 7 Amps |
| input sensitivity | 250 mV - 2.5 V |
Weight and Dimensions| width | 4.3” |
|---|---|
| depth | 7.8” |
| height | 2.13” |
Power| idle current draw | 1.5 Amps |
|---|---|
| maximum current draw | 7 Amps |
| input sensitivity | 250 mV - 2.5 V |
Weight and Dimensions| width | 6” |
|---|---|
| depth | 7.8” |
| height | 2.13” |
Power| idle current draw | 0.6 Amps |
|---|---|
| maximum current draw | 13 Amps |
| input sensitivity | 250 mV - 2.5 V |
Weight and Dimensions| width | 6” |
|---|---|
| height | 2.13” |
Power| idle current draw | 2.0 Amps |
|---|---|
| maximum current draw | 14 Amps |
| input sensitivity | 250 mV - 2.5 V |
Weight and Dimensions| depth | 7.8” |
|---|---|
| height | 2.13” |
Power| idle current draw | 1.2 Amps |
|---|---|
| maximum current draw | 26 Amps |
| input sensitivity | 250 mV - 2.5 V |
Weight and Dimensions| depth | 7.8” |
|---|---|
| height | 2.13” |
Lists the single tool needed for wire terminations: an insulated flat blade screwdriver.
Explains how to configure the amplifier for stereo or mono operation using a bottom-mounted switch.
Details how to optimize amplifier performance for 2 or 4 ohm stereo and 4 or 8 ohm bridged configurations.
Offers advice on routing wires, preventing shorts, and ensuring secure connections for reliable operation.
Details how to connect signal sources using RCA jacks, including options for different head unit outputs.
Explains how to connect loudspeakers, emphasizing correct polarity for optimal bass response and sound image.
Covers power connections, fusing, and remote turn-on setup for reliable amplifier operation.
Guides on safely powering up, verifying connections, and adjusting input levels for optimal listening.
Details the LSE circuit's function for compensating speaker rolloff and extending deep bass, with adjustment guidance.
Explains how the amplifier is protected against overheating and short circuits, and what to do if protection is activated.
Provides information on the amplifier's limited warranty and advises contacting dealers for service.
Provides detailed specifications for the D-6011, D-10011, and D-200 II amplifier models.
Provides detailed specifications for the CLASS A-5011 and CA-100 amplifier models.
To Next Page