Page 7
Normal Operation
Programmed Operation
Select Cool or Heat with the Mode Switch.
Normally leave the fan switched to Auto.
In Fan Auto, the fan will turn on only with a heat
or cool demand. When Fan On is selected, the
fan will run continuously.
The desired set temperature may be temporarily
overridden. The thermostat will revert to the
programmed settings in the following time period.
Select RUN with the Program Switch.
COOLER & WARMER
BUTTONS
PROGRAM SWITCH
RUN program
Program OFF
SET program
MODE SWITCH
Cool, Off, or Heat
On or Auto
FAN SWITCH
OWNER'S MANUAL
S1-THEC11P5S
To Next Page
Loading...
