
Do you have a question about the Source 1 S1-THSU303-S and is the answer not in the manual?
| Model | S1-THSU303-S |
|---|---|
| Connectivity | Wi-Fi |
| Display | LCD |
| Temperature Range | 45°F to 90°F (7°C to 32°C) |
| Humidity Control | No |
| Thermostat Type | Programmable |
| Stages Heat | 1 |
| Stages Cool | 1 |
| Programmability | 7-Day Programmable |
| Backlight | Yes |
| Hold Function | Yes |
| Filter Change Alert | Yes |
| Battery Life | Approximately 1 year |
Detailed explanation of the thermostat's display screen elements and icons for user understanding.
Instructions for setting the current time and day on the thermostat for accurate operation.
Guide to choosing between Heating, Cooling, Auto, or Off modes for system control.
How to check the current outdoor and indoor temperatures displayed on the thermostat unit.
Step-by-step guide for safely removing an old thermostat before new installation.
Mapping old thermostat terminals to new thermostat connector terminals for proper system wiring.
Visual guides illustrating common conventional and heat pump wiring configurations.
Procedure for testing thermostat outputs and confirming connected equipment functions.
Configuration options for adjusting the thermostat's display backlight brightness and behavior.
How to set temporary energy-saving setpoints for absences to conserve energy.
Setting up daily schedules with multiple time periods and desired temperature setpoints for comfort.
Configuring the thermostat for programmable or non-programmable operation based on user needs.
Adjusting temperature differences before heating/cooling stages activate to prevent short cycling.
Configuring settings for humidification and dehumidification control systems for enhanced comfort.
Setting up operation for dual fuel heating systems involving heat pumps and fossil fuel.
Defining how the thermostat responds to utility demand response signals during events.
Adjusting the cool setpoint during an active utility demand response event for load management.