16
User Setup: Backlight Operation
How to Change Settings in the Setup Screens
To enter Advanced Setup, press the SETUP button, then press MODE. Use the
WARMER or COOLER buttons to adjust the value of your selection. Press MODE to
advance to the next setup step. Press SETUP again to leave the setup screens.
Backlight (setup steps 3-8)
Backlight (setup step 3)
Off - Backlight turns on with any button press and turns off
after 8 seconds.
On - Backlight is on continuously.
Backlight Intensity Level (setup step 4)
The backlight can be adjusted between Off and seven levels of
brightness.
Night Dimmer (setup step 5) - Selecting On allows for automatic
dimming of the display at night.
Night Dimmer Brightness (setup step 6)
The nighttime backlight can be adjusted between OFF and seven
levels of brightness.
Night Dimmer Start Time (setup step 7) - 12:00 am to 12:00 am
Night Dimmer Stop Time (setup step 8) - 12:00 am to 12:00 am
Language (setup step 15)
Setup step instructions on the scrolling display can be set for English,
Spanish, or French.
Press the SETUP button, then press MODE repeatedly until the
Language setup step appears. Use the WARMER or COOLER buttons to
make selection. Press MODE to advance to the next step. Press SETUP
to leave the setup screens.
To Next Page
Loading...
Need help?
General
