Sourcetronic ST500 Series - Chapter 5 Function parameter; 5-1-18.E3 Group - Virtual DI, Virtual DO

Chapter 5 Function parameter
52
Chapter 5
396.
E2.12
PID feedback loss detection
time
0.0s to 20.0s
0.0s
☆
397.
E2.13
Proportional gain KP1
0.0 to 200.0
80.0
☆
398.
E2.14
Integration time Ti1
0.01s to 10.00s
0.50s
☆
399.
E2.15
Differential time Td1
0.00s to 10.000s
0.000s
☆
400.
E2.16
Proportional gain KP2
0.0 to 200.0
20.0
☆
401.
E2.17
Integration time Ti2
0.01s to 10.00s
2.00s
☆
402.
E2.18
Differential time Td2
0.00 to 10.000
0.000s
☆
403.
E2.19
PID parameter switching
conditions
0:
no switching
1:
switching via terminals
2:
automatically switching
according to deviation.
0
☆
404.
E2.20
PID parameter switching
deviation 1
0.0% to E2.21
20.0%
☆
405.
E2.21
PID parameter switching
deviation 2
E2.20 to 100.0%
80.0%
☆
406.
E2.22
PID integral properties
Units digit: integral separation
0: Invalid; 1: Valid
Tens digit: whether stop integration
when output reaches limit
0: continue; 1: stop
00
☆
407.
E2.23
PID initial value
0.0% to 100.0%
0.0%
☆
408.
E2.24
PID initial value hold time
0.00s to 360.00s
0.00s
☆
409.
E2.25
Maximum deviation of twice
outputs(forward)
0.00% to 100.00%
1.00%
☆
410.
E2.26
Maximum deviation of twice
outputs(backward)
0.00% to 100.00%
1.00%
☆
411.
E2.27
Computing status after PID
stop
0: stop without computing
1: stop with computing
1
☆
412.
E2.28
reserved
413.
E2.29
PID automatic decrease
frequency selection
0: invalid; 1: valid
1
☆
414.
E2.30
PID stop frequency
0.00Hz~maximum frequency
(F0.19)
25
☆
415.
E2.31
PID checking time
0s~3600
s
10
☆
416.
E2.32
PID checking times
1~500
20
☆
5-1-18.E3 Group – Virtual DI, Virtual DO