SousVideTools VS520-P - Marinate Food with a Marinate Bowl; Cleaning & Maintenance

6
• At the beginning of the vacuum packaging in a canister or a vacuum bowl, slightly press down the
cover or on the hose adaptor to ensure no loose of the hose and to avoid air leaking through the
gap between the cover and the canister top rim for a few seconds.
• To test vacuum, simply tug on the cover. It shall not move.
• Different canisters are available in the market and therefoe the operation procedure will differ.
 Pleaserefertotheindividualmanualforthespeciccanister.
• For best effect, it is better to let the appliance cool down for 1 minute before using it again.
• At the beginning of vacuum packing in a canister, press down slightly on the canister cover/hose
adaptor to ensure it is not loose and to avoid air leaking through the gap between the cover and
the canister top rim for a few seconds.
• To test vacuum, simply tug on the cover. It should not move
• Do not press any button to interfere with the whole process.
When moist foods are under vacuuming, moisture will be stored in adaptor. Remember to clean up
the adaptor if there is water before vacumming.
5 Press the canister button to start vacuuming. To ensure there is no air leaking between the cover and the
canister, use your hand to push down the cover at the beginning of the vacuuming work. The machine will
stop automatically when enough vacuum pressure is achieved.
6 Takeoutthehosetubefromthecanisterorbowlimmediatelyrstafterthejobiscompleted.
Marinate food with a marinate bowl
This function reduces the amount of time required to marinate food through 5 cycles, which alternate the
suction and release of air inside the container.
1 Fill the container and connect it to the machine as described above.
2 Set the machine vacuum power according to the food being marinated.
3 Hook the lid onto the base of the machine by lowering the lock handle.
4 Pressthe“Marinate”key:the“PROGRESS”displaywillshowthenumber9andtherstairsuctionand 
release cycle will begin. The progress display will indicate the progress of the marinating cycle. Wait until
the display reads “0” and the light turns off. The quick marinate process is completed.
5 Remove the tube from the container and the machine.
The machine can be stopped at any time by pressing “Automatic/stop”.
If the marinate process needs to be repeated, the air will need to be released from the container before
reconnecting it to the machine.
Opening canister after vacuum packing
In order to open the canister, you need to press the “Release “button on the canister cover.
Vacuum Sealer
1 Always unplug the unit before cleaning.
2 Do not immerse in water or any other liquid.
3 Avoid using abrasive products or material to clean the unit, for they will scratch the surface.
4 Use a mild dishwashing soap and a warm, damp cloth to wipe away food residue or around components.
5 Dry thoroughly before using again.
CLEANING & MAINTENANCE