Soyer PH-9 SRM12 Operating Manual

Name: Soyer PH-9 SRM12
Brand: Soyer
Rating: 4 (1 reviews)

74 pages

To Next Page

Operating manual

Stud welding device

SRM technology

BMK-8i

Stud welding gun

PH-9 SRM

PH-3N SRM

Table of Contents3
General Information6
Validity of the Operating Manual6
Registered Trademarks6
Abbreviations and Definitions7
Declarations of Conformity7
Manufacturer9
Instruction, Training9
Standards and Directives9
Important Safety Instructions10
Safety Alerts Used10
General Safety Instructions11
Safety Instructions for the Working Method14
Personal Protection Equipment15
Intended Use of the Stud Welding Device16
Incorrect Use16
Intended Use of the Stud Welding Guns16
Operating Company Prerequisites17
Prerequisites for Personnel17
Transport18
Storage, Shutdown18
Disposal18
Description of the BMK-8I Stud Welding Device19
Type Designation19
Working Method19
Stud Welding with SRM Technology20
Drawn Arc Stud Welding Technology with Shielding Gas21
Overview of the Controls22
Display and Setting Area24
Technical Data of the BMK-8I Stud Welding Device25
Permitted Stud Welding Guns26
Cleaning the Stud Welding Device27
Description of the SRM Stud Chuck28
Setting the SRM Stud Chuck28
Description of the PH-9 SRM Stud Welding Gun30
Technical Data of the PH-9 SRM31
Stud Welding Gun31
Installing the SRM Stud Chuck in PH-9 SRM 1232
Replacing the SRM 12 Support Tube Insert with PH-9 SRM34
Cleaning the Stud Welding Gun35
Description of the PH-9 SRM +G Stud Welding Gun36
Technical Data of the PH-9 SRM37
12 +G Stud Welding Gun37
Operation of the PH-9 SRM38
12 +G38
Safety Check38
Welding with the PH-9 SRM39
12 +G39
Installing the SRM Stud Chuck for the PH-9 SRM39
Replacing the SRM Support Tube Insert with the PH-9 SRM42
Support Tube Insert with the PH-9 SRM 12 +G42
Cleaning the Stud Welding Gun44
Description of the PH-3N SRM Stud Welding Gun45
Technical Data of PH-3N SRM Stud Welding Gun46
Installing the SRM Stud Chuck with PH-3N SRM47
Cleaning the Stud Welding Gun49
Setup and Connection50
Requirements for the Installation Location50
Connection of the Stud Welding Device and the Stud Welding Guns51
Mains Connection51
Connecting the Earth Cable51
Connecting the Stud Welding Gun52
Connecting the Shielding Gas Supply52
Settings56
Setting the Welding Parameters56
Help Tables for Device Setting56
Setting the Welding Current and the Welding Time58
Setting/Deactivating the SRM Current59
Setting the Gas Preflow Time60
Setting the Lift Time (Height of Lift) in "Setup" Mode61
Welding Operation64
Carrying out Welding64
Notes on Checking the Quality of the Weld66
Visual Inspection66
Switching off the Device67
Weld Defects and Their Causes68
Maintenance and Repair72
Service72
Warranty Conditions72

Other manuals for Soyer PH-9 SRM12

Operating Instructions82 pages

Questions and Answers:

Need help?

Do you have a question about the Soyer PH-9 SRM12 and is the answer not in the manual?

Soyer PH-9 SRM12 Specifications

General

Brand	Soyer
Model	PH-9 SRM12
Category	Welding System
Language	English

Related product manuals