Need help?Do you have a question about the Spaceman 6225A-50Hz and is the answer not in the manual?
Specifies environmental and physical requirements for placing the machine.
Instructions for correctly connecting the machine to the power supply.
Procedure for adding product mix into the machine hoppers.
Instructions on how to dispense the frozen product.
How to adjust the viscosity setting for desired product firmness.
Addresses problems related to low temperature protection activation.
Troubleshooting steps for motor overload errors.
Solutions for 'Machine Protect' error codes.
Guidance for issues related to the temperature sensor.
Troubleshooting steps for motor amplifier errors.
Diagnosing and fixing issues where the hopper is not sufficiently cold.
Resolving excessive product leaks into the internal drip tray.
Addressing problems where the hopper contents are freezing unexpectedly.
Solutions for product leaking from the dispensing door spout.
Troubleshooting for automatic machine shutdowns, often due to freeze-up.
Resolving issues where the dispensed product is too soft.
Diagnosing and fixing unusual noises originating from the machine.
General| Model | 6225A-50Hz |
|---|---|
| Frequency | 50Hz |
| Voltage | 220-240V |
| Refrigerant | R404A |
| Type | Soft Serve Ice Cream Maker |
To Next Page