WASH ALL PARTS
Carefully and thoroughly wash all
parts removed from the machine
using supplied brushes as well as
sponges, and clean towels
if machine has air pumps, be sure
to include all air pump parts in
cleaning
5
Carefully and thoroughly clean all
gaskets and O-rings removed
from the machine; be sure to
wipe gaskets and O-rings to
remove excess lubricant
7
When cleaning the dispensing
door assembly, clean the priming
port with a small brush
6
Verify all parts are clean and free
of all food product prior to re-
assembling machine
8
Spaceman USA Soft Serve Pump Training
rev042219
To Next Page
Loading...
