ASSEMBLE
4. Install dispensing door
4a
Place O-rings (4) on side draw
valves (2); place H-ring (1) on
middle draw valve (1); place O-
rings (4) on prime plugs (2);
coat all ring areas with
Spaceman lubricant
4b
Push prime plugs
into holes on top
of dispensing door
4c
Insert draw valves into
dispensing door, O-rings-
first; middle draw valve
goes in the middle and
slots face outward
Spaceman USA Soft Serve Pump Training
rev042219
To Next Page
Loading...
