SpaceraiL LEVEL 1 - Connect Rails J, B, H

Page 10 Spacerails, LLC. All rights reserved. Spacerails.com
CONNECT RAILS J, B, AND H
Use the following illustrations and pictures as references for attaching the Rails to the structure:
Step 4: Connect both J Rail sections between the back top corner of Shaft A and the back top corner of Shaft E.
Step 5: Connect both H Rail sections between the exit of the Elevator and the front top corner of Shaft A.
Step 6: Connect both B Rail sections between the front top corner of Shaft E and the single side of the Split.
STEP 4
J Rail
STEP 5
H Rail
STEP 6
B Rail
A
B
C
D
E
STEP 4
(J Rail)
STEP 5
(H Rail)
STEP 6
(B Rail)
EA
C