36
25.
Roll completed assembly to desired position. Fill base with water (approx. 34 gallons
(128 Liters)) or sand (approx. 300 lbs. (136 kg)) and push the cap (41) into base (1).
1
41
41
WARNING!
DO NOT LEAVE ASSEMBLY UNATTENDED
WHEN EMPTY; IT MAY TIP OVER.
CAUTION!
ADD TWO GALLONS (7.6 LITERS)
OF NON-TOXIC ANTIFREEZE IN
SUB-FREEZING CLIMATES.
IF USING SAND: 2 GALLONS OF
ANTI-FREEZE IS NOT REQUIRED.
NOTE:
Cap (41) MUST be tightened COMPLETELY
and SECURELY to prevent leakage.
CHECK WATER LEVEL BEFORE EACH USE!
FAILURE TO FOLLOW THIS WARNING COULD RESULT
IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
WARNING!
To Next Page
Loading...
