SpaNet SV2 - User Manual

SpaNet SV2 Specifications

General

Brand	SpaNet
Model	SV2
Category	Control Panel
Language	English

Summary

SYSTEM OPERATING MANUAL

Safety Warnings and Precautions

Crucial safety information and warnings before installation or connection.

SV Series Features Overview

KEYPAD OPERATION

Setting the Date and Time

Adjusting Spa Temperature

Instructions on how to set and adjust the desired spa water temperature.

Heater Operating Modes

Heating Control and Protection

Details on Fast Heat Cycle, Freeze, and Overheat protection mechanisms.

Pump Operation Control

Sanitise Cycles Management

ADVANCED CONFIGURATION SETTINGS

Setup Menu Overview

Overview of advanced settings for customising controller functions.

Sleep Timer Programming ([SNZE])

PowerSAVE Menu for Off-Peak ([P.SAV])

TROUBLESHOOTING AND ERROR CODES

Heater Plug Error (ER-2)

Troubleshooting guide for heater sensor communication issues.

Water Prime Error (ER-3)

Troubleshooting guide for water priming failures and air detection.

Thermal Trip Error (ER-4)

Troubleshooting guide for heater thermal trip faults and overheating.

Pool Too Hot Error (ER-5)

Troubleshooting guide for spa pool over-temperature issues.

12 V Overload Error (ER-6)

Troubleshooting guide for 12V power supply overload issues.

Control Fault HVS Error (ER-8)

Troubleshooting guide for heater relay faults (HVS).

Over Current Error (ER-10)