SV Series Spa Controls 10
Setting the Date and Time
How to program the clock
Press to select TIME display mode
Press to enter adjustment
Press to confirm & save
Year
Month
Day
Weekday
Format
Hours
Minutes
Be sure to set the date and time before operating the spa. Vital functions such as
filtration, sanitisation cycles and power saving settings depend on the time and date
being set correctly.
Press the button to change display mode to TIME
Press to enter clock adjustment
The settings appear in the following order:
DATE
• Year (yyyy)
• Month (mm)
• Day (dd)
• Weekday (mon - sun)
TIME
• Format (24 hr / 12 hr)
• Hours (xx:00)
• Minutes (00:xx)
Press the or button
• to set year, month, day, hours and minutes
• to change between 24-hour format and 12-hour format
Press the button to save each setting and move to the next setting
IMPORTANT NOTES
• Leap years are taken into account
• Daylight savings times are NOT taken into account. The clock will not
automatically adjust. It must be changed manually
• The real time clock will continue to operate when mains power is off for a period up
to 16 hrs
To Next Page
Loading...
Need help?
General
