To Next PageTo Next Page
Need help?Do you have a question about the Sparkfun Electronics RedBoard and is the answer not in the manual?
General| Brand | Sparkfun Electronics |
|---|---|
| Model | RedBoard |
| Category | Motherboard |
| Language | English |
Introduces the concept of blinking an LED as a foundational experiment.
Provides a visual guide for assembling the LED blinking circuit.
Introduces potentiometers as variable resistors to control an LED's brightness.
Visual guide for wiring the potentiometer and LED circuit.
Introduces RGB LEDs for creating various color combinations.
Visual guide for wiring the RGB LED circuit.
Guides on connecting and controlling eight LEDs simultaneously for lighting sequences.
Visual guide for wiring the multiple LEDs circuit.
Introduces push buttons as common inputs and how they work with the RedBoard.
Visual guide for wiring the push button circuit.
Explains how photo resistors change resistance with light and are used in voltage dividers.
Visual guide for wiring the photo resistor circuit.
Introduces temperature sensors and how they measure ambient temperature.
Introduces servo motors and how they are controlled by pulse width modulation.
Introduces flex sensors as variable resistors and their use in controlling servo position.
Introduces soft potentiometers for detecting pressure and controlling an RGB LED.
Introduces piezo buzzers for creating tones and simple melodies.
Guides on using transistors to switch higher currents for controlling DC motors.
Introduces relays as electrically controlled switches for controlling higher power devices.
Introduces shift registers for expanding microcontroller outputs to control multiple LEDs.
Introduces Liquid Crystal Displays (LCDs) for displaying information from the RedBoard.
Guides on building a Simon Says game using LEDs, buttons, and a buzzer.
