SPC BAAMBA - Cleaning the Wheels; Cleaning the Sensors; 6 Common Problems

26
5.6 Cleaning the wheels
5.7 Cleaning the sensors
6. Common problems
For reference number 6401N (SPC Baamba) the error indicator light will be blue, while for reference
number 6402S (SPC Baamba Gyro 4.0), the error indicator light will be red.
Problem indicator Problem Problem description Solution
The indicator light
ashes twice and
the device makes a
sound
Left wheel failure The left wheel is
overloaded and isn't
turning.
Check if there are any
foreign materials in the
left wheel.
The indicator light
ashes 3 times and
the device makes a
sound
Right wheel failure The right wheel is
overloaded and isn't
turning.
Check if there are any
foreign materials in the
right wheel.
The indicator light
ashes 4 times and
the device makes a
sound
Power on failure The device starts to
operate and stops
after 1 second.
Place the device on the
oor again. Do not hold
it up in the air.
Clean the wheels (front, left and right) regularly with a cleaning
brush.
Once the components have been cleaned, use a dry cotton
cloth to clean the transparent plate and, by doing so, avoiding
dust accumulating on the plate, which could affect the
product’s functioning.
Slope
sensors
IR sensor