SpeakerCraft MT8 Three User Manual

NOTE: In cases where the standard mounting configuration of AcoustaCell
™
is not
practical because of fireblocks or other obstructions, it may be mounted in any
configuration that the wall space permits. This may include mounting both shorter
pieces above the center chamber or both of them below the center chamber. It may
also include cutting the material down to fit into openings. To cut AcoustaCell
™
, place it
flatonasurfaceandplaceastraightedgealongthelineyouwishtocut.Useasharp
utilityknifetocutthroughthematerial.Aftercuttinghalf-waythrough,turnitoverand
repeat the process from the other side.
13
Figure 7a Figure 7b
Figure 7c Figure 8

SpeakerCraft MT8 Three Specifications

General

Brand	SpeakerCraft
Model	MT8 Three
Category	Speakers
Language	English