19
SpeakerCraft – 1-800-472-5555 – 1-707-778-5733
16 CHANNEL, FULLY CONFIGURABLE POWER AMPLIFIERS
CONFIGURATION AND SETUP TOOL
Open the Conguration and Setup Tool Using a Web Browser. Once a direct
Ethernet or local area network connection is made, use the web browser included
with your laptop, PC, iPad, tablet or smartphone to log into the web server in the
SC16-50. Enter the current IP address of the SC16-50 into the URL line of your
web browser.
The factory default IP address of the SC16-50 is http://192.168.1.100
Note: This may be the same for another product on your network. Make sure there are no conflicts.
The Network Settings main selection is displayed when the web interface
is rst opened.
NETWORK SETTINGS MAIN SELECTION
Choose the Network Settings main selection and the Network Settings page is
displayed. The current IP address and subnet mask of the SC16-50 are displayed.
Both the IP address and the subnet mask can be changed and saved to the
amplier’s memory by selecting the save option.
Note: Changing the IP address is only recommended when connecting
to a local area network. A recessed reset button located on the back of the
SC16-50 restores the IP address, network settings and amplifier configuration
back to factory default.
FIGURE 8
To Next Page
Loading...
Need help?
General
