EasyManuals Logo

SpeakerCraft SoundSource User Manual

SpeakerCraft SoundSource
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
SLEEP TIMER
The SoundSource can automatically turn itself off after a
specified amount of time, ranging from 90 to 10 minutes.
1. While the SoundSource is on, press the
Sleep button until
Sleep
flashes in the display.
2. Press the Sleep button repeatedly to set the Sleep Timer
from 90 to 10 minutes. The
Sleep
indicator and the time
you set will illuminate.
(See Diagram 15)
3. To cancel the Sleep Timer, simply press the Sleep button
repeatedly until the
00
indicator appears. The
Sleep
indicator will start flashing.
4. Within 5 seconds, the
Sleep
indicator will disappear and
the Sleep Timer is now cancelled.
NOTE: During the last 9 minutes of the Sleep Timer, the
volume will gradually decrease to the lowest level. You can
press any button to stop the decreasing of the volume.
AUDIO ADJUSTMENTS
The Adjust (-) or (+) buttons on the remote control are used
in conjunction with Balance, Treble and Bass to increment or
decrement their level.
1. Press the Balance button on the remote control. The
[BAL]
indicator will appear in the display. Press the Adjust (-) or (+)
button to adjust balance toward the left or right speakers.
2. Press the Bass button on the remote control. The
[BAS]
indicator will appear in the display. Press Adjust (-) or (+)
button to decrease or increase the level of bass. (Or press
Bass (-) or (+) on the front panel.)
3. Press the Treble button on the remote control. The
[TRE]
indicator will appear in the display. Press Adjust (-) or (+)
button to decrease or increase the level of treble. (Or press
Treble (-) or (+) on the front panel.)
LOADING CDs
1. Press the Power button to turn the SoundSource on.
2. Select CD function by pressing Source button repeatedly on
front panel or on the remote control.
3. Press Open/Close button to open CD door, then insert or
replace one disc.
4. Press Open/Close button to close CD door. The system will
automatically read the CD status which includes total play
tracks and play time of the CD. (See Diagram 16)
SoundSource Owner’s Manual Page 13
Diagram 15:
Sleep Timer
Diagram 16:
CD Status

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SpeakerCraft SoundSource and is the answer not in the manual?

SpeakerCraft SoundSource Specifications

General IconGeneral
BrandSpeakerCraft
ModelSoundSource
CategoryStereo System
LanguageEnglish