Spear & Jackson CS4100-3 - Operating the Chainsaw; Starting the Engine

19
AFTER SALES SUPPORT 0345 605 2067
OPERATE
START THE ENGINE
WARNING! Do not start the engine whilst holding the
chainsaw in one hand. The saw chain may touch
your body. This is very dangerous.
1. Set the switch to the “1” position.
2. Engage the chain-brake (push it forward until an audible
click is heard.
3. Press and release the primer bulb (B) 10 times.
4. Pull the choke control (A) out to engage.
switch
B
A
START
1
4 6
30s
8 9
2 3
5
7
start
10X
4X
START
1
2
3
10X
4
b