Spearhead Multicut 620
20
2020
20
Transportation
TransportationTransportation
Transportation
First disengage the PTO drive, fold the
wings fully up and secure with locking
pin and transport strap (Fig. 7). Raise
he machine up above the height stop
carrying the machine weight on the
height ram, this transfers pressure to
the hydra gas suspension system.
Please observe Public Highway
Regulations, concerning the towing of
implements, and securely attach a
registration and lighting board.
Transportation Position
Transport Strap
Note
NoteNote
Note
Before parking and unhitching your machine please lower the height ram onto its
stop to relieve the hydraulic pressure, before releasing to hoses. Observe Public
Highway Regulations, concerning the towing of implements, and securely attach a
registration and lighting board.
Warning
Avoid transporting machine at high speed over rough ground
Maximum speed on highway – 20mph (30kph).
Warning
Do not transport the machine over rough ground on the height pin alone
as any shock loads may cause stress leading to fatigue and failure
Never transport along public highways with the wings only supported by
the hydraulics, always secure with locking pins.
To Next Page
Loading...