Spearhead Multicut 620 - Page 6

Spearhead Multicut 620
6
66
6
C
CC
CE
EE
E Declaration of Conformity,
Declaration of Conformity,Declaration of Conformity,
Declaration of Conformity,
Conforming to E
Conforming to EConforming to E
Conforming to EU
UU
U Machinery
Machinery Machinery
Machinery Directive
Directive Directive
Directive
2006/42
2006/422006/42
2006/42/
//
/EC
ECEC
EC
We, Spearhead Machinery Ltd, Green View, Salford Priors,
Evesham, Worcestershire, WR11 8SW hereby declare that:
Product
Product Product
Product
……………………………………………..…………………………
Product Code
Product CodeProduct Code
Product Code ……………………………………………..…………………………
Serial No
Serial NoSerial No
Serial No ……………………………………………..……..………………….
Type
TypeType
Type ……………………………………………..…………………………
Manufactured by: Alamo Manufacturing Services (UK) Limited, Station
Road, Salford Priors, Evesham, Worcestershire, WR11 8SW
Complies with the required provisions of the Machinery Directive
2006/42/EC. The Machinery Directive is supported by the following
harmonized standards:
• BS EN ISO 14121-1 (2007) Safety of Machinery – Risk Assessment,
Part 1: Principles Part 2: Practical Guide and Examples of Methods.
• BS EN ISO 12100-1 (2010) Safety of Machinery – Part 1: Basic
Terminology and Methodology Part 2: Technical Principles.
• BS EN 349 (1993) + A1 (2008) Safety of Machinery – Minimum
Distances to avoid the Entrapment of Human Body Parts.
• BS EN 953 (1998) Safety of Machinery – Guards General
Requirements for the Design and Construction of Fixed and Movable
Guards.
• BS EN 982 (1996) + A1 (2008) Safety Requirements for Fluid Power
Systems and their Components. Hydraulics.
The EC Declaration only applies if the machine stated above is used in
accordance with the operating instructions.
Signed
SignedSigned
Signed
(On be
On beOn be
On behalf of Spearhead Machinery Ltd
half of Spearhead Machinery Ltdhalf of Spearhead Machinery Ltd
half of Spearhead Machinery Ltd)
Status
StatusStatus
Status
General Manager
Date
DateDate
Date
………………………………………………