Spearhead QHD Flail Mowers
17
Regularly
Check the condition of drive belts, ensuring they are aligned and properly
tensioned to avoid any unnecessary belt wear.
Remove both guards for access when tensioning belts; ensure belts are
running in line after adjustment.
Check there is no wrapping of string, plastic, grass or other debris on rear
roller.
N.B.
The pulleys are fitted with taper locks which have 7 screws to tighten, and 3 holes to
aid removal in the pulley centers.
Skids
When operating on abrasive soils, particularly in stubbles and similar conditions with
thin ground cover, excessive skid wear may be expected. To provide extra
protection and to prolong life of the skids, special hard facing rods can be used.
To Next Page
Loading...
