Spearhead QHD Flail Mowers
18
Storage
At the end of the season before storing, thoroughly wash the machine off, removing
all traces of grass and dirt. Great care must be taken when washing with high-
pressure hoses, do not hold the water jet close to the paintwork. Use steam cleaners
with caution and be sure to remove all detergents to avoid any discoloring or damage
to paint. Grease all grease points until fresh grease shows. Store PTO shaft and
drive belts in a dry place.
Transportation
Please observe Public Highway Regulations, concerning transport of machines and
securely attach a registration/lighting board. Take care when travelling over rough
ground to avoid bouncing the machine on the tractor linkage, causing unnecessary
strain.
Warning – be aware of the extra width hazard of ‘off-
set’ machines.
Servicing Checklist (see relevant sections for full details)
Regularly Gearbox: Inspect seals, check bolts for tightness.
Flail rotor: check bolts for tightness, check condition of flails,
check retaining bolts for tightness, check rotor bearing bolts for
tightness.
Daily Maintain correct belt tension.
Check gearbox oil level.
Grease PTO shaft.
Grease all points as shown in diagram.
Every Year Drain and replace gearbox oil with EP90.
To Next Page
Loading...
