28
B
5
Max pressure in negative volume chamber
Introduces more sag for more suppleness at the beginning of the shock
stroke creating a more active ride.
Release all of the air from the shock.
Compress the shock to the full bottom line (B).
While holding the shock at the full bottom line, press the negative
pressure release button (5) for a few seconds.
Pressurize the shock to ride pressure. You should have 4-5 mm of
shock sag (shaded blue) which can be fine-tuned by adding/removing
pressure.
Comfort setting
Introduces added volume spacers and reduces pressure for a more
compliant ride that resists bottoming out.
Release all of the air from the air valve.
Remove the shock from the frame.
Unthread (counterclockwise) the air can either by hand or using a strap
wrench.
This process requires special skills and tools and is best
completed by a professional with experience. Please see an
Authorized Specialized Retailer for assistance.
CAUTION: Do not use pliers or any other tools that can damage
the shock surface.
To Next Page
Loading...
