Speck BADU Magic 8 - Safety Information; Important Safety Instructions

3
1.0 INTRODUCTION
1.1.1 Congratulations on your recent purchase of a Speck Pool and Spa Pump. Please take a moment
to read through the entire manual before installing your new pump. Your pump must be installed
and operated as specied.
2.0 SAFETY INFORMATION
2.1 IMPORTANT SAFETY INSTRUCTIONS, READ AND FOLLOW
ALL INSTRUCTIONS. SAVE ALL INSTRUCTIONS.
2.1.1 WARNING: Hazardous Suction. Pump suction is hazardous and can trap hair and body
parts resulting in severe injury or death. Do not block ltration suction lines with any part of your
body. If someone becomes trapped, immediately turn the pump o.
2.1.2
WARNING: Two suction inlets (minimum 500mm apart) must be provided into every
pump to avoid suction entrapment. If a suction cover is broken, missing or loose, do not operate
the swimming pool or spa.
2.1.3 A qualied technician should carry out the pump installation.
2.1.4 Always wear protective clothing and gloves when handling adhesives.
2.1.5 The pump must be installed and operated in accordance with national wiring rules.
2.1.6 Children should be supervised to ensure they do not play with the appliance.
2.1.7 If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualied persons in order to avoid a hazard.
2.1.8 This appliance is not intended to be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
2.1.9 The pump power must be supplied through a residual current device (RCD) having a rated
residual operating current not exceeding 30mA.
2.1.10 Routinely check the pump basket, skimmer and entire pool system to maximise the life of the
pool equipment and personal safely. Always turn the pump o before carrying out checks and
maintenance.
2.1.11 DO NOT remove any safety alert labels on the pump such as DANGER, WARNING or CAUTION.
Keep safety labels in good condition and replace missing or damaged labels.