Need help?Do you have a question about the Spectra Precision Epoch 25 L1 and is the answer not in the manual?
General| Brand | Spectra Precision |
|---|---|
| Model | Epoch 25 L1 |
| Category | GPS |
| Language | English |
Alerts about potential risks of injury or equipment damage from specific operations or conditions.
Detailed safety instructions for handling, charging, and storing the device's Lithium Polymer battery.
Guidelines on operating and storing the receiver outside specified temperature ranges and avoiding immersion in water.
Overview of the Epoch 25 GPS receiver and its design for surveying applications.
Lists the key features and capabilities of the Epoch 25 GPS receiver.
Instructions on how to handle the receiver with care and avoid potential damage from environmental factors.
Explanation of performance limitations due to U.S. export regulations and virtual geographical boundaries.
Information on accessing electronic copies, registration, technical assistance, and providing feedback.
Identifies the components, ports, and connectors on the base receiver unit.
Identifies the components, ports, and connectors on the rover receiver unit.
Covers environmental conditions and potential sources of electrical interference.
Step-by-step instructions for setting up the base receiver on a tripod.
Step-by-step instructions for setting up the rover receiver on a range pole.
Details power sources for rover and base receivers, charging, and storage of batteries.
Explains the function of the power button and the meaning of different LED states and flash patterns.
Describes how to log data internally or to a controller and storage requirements.
Information on receiver firmware and how to reset the receiver to factory default settings.
Details the WinFlash utility for installing software, firmware upgrades, and running diagnostics.
Step-by-step guide on how to upgrade the receiver firmware using the WinFlash utility.
Guidance on radio configuration and where to obtain information.
Details the size, weight, operating times, and casing of the Epoch 25 GPS receiver.
Provides accuracy data for RTK, Static/FastStatic, and WAAS modes.
Lists technical details for tracking, signal processing, start-up, initialization, and communications.
Details the default settings for various functions like SV Enable, Elevation mask, and Baud rate.
Describes the default behavior when starting the GPS receiver, especially regarding logging.
Instructions on how to restore the receiver to its original factory default settings.
Provides detailed pinout diagrams for the receiver's serial ports (Port 1 and Port 2).
Describes the supplied data-I/O cable for firmware upgrades and power connections.
Lists the messages generated based on selected RTCM versions and their contents.
Details the frequency at which RTCM messages are generated when enabled in a base receiver.
Explains common LED conditions, their possible causes, and recommended solutions.
Addresses issues like the receiver not powering up, not logging data, or not responding.
To Next Page