Spectra Precision Epoch 25 L1 User Manual

Epoch 25 L1/L2 GPS System User Guide 17
Setup, Connection, and Cabling 2
Figure 2.4 Epoch GPS receiver set up as a rover receiver
20.1 Configuring the internal rover radio
To configure the internal radio in the Epoch 25 GPS receiver, use the field software on
the Recon controller.
For more information, see the documentation for the field software.
By default, the internal radio has only a few “test” frequencies installed at the factory.
To configure the frequencies of the base or rover, contact your Spectra Precision dealer.
For more information, see the documentation supplied with your base radio.
Epoch 25 GPS antenna
Rover receiver
Spectra Precision Recon
controller

Spectra Precision Epoch 25 L1 Specifications

General

Brand	Spectra Precision
Model	Epoch 25 L1
Category	GPS
Language	English