Spectra 1728/EX & 1738/EX - 25 - Programming Guide
Section # Hexa Value: Each digit is a value from 1 to D (see Button Options Table)
[7 11] ____/____/____/____/____/____/____/____ remote control #1
A B C D A+B C+D A+C B+D
[712] ____/____/____/____/____/____/____/____ remote control #2
A B C D A+B C+D A+C B+D
[713] ____/____/____/____/____/____/____/____ remote control #3
A B C D A+B C+D A+C B+D
[714] ____/____/____/____/____/____/____/____ remote control #4
A B C D A+B C+D A+C B+D
[715] ____/____/____/____/____/____/____/____ remote control #5
A B C D A+B C+D A+C B+D
[716] ____/____/____/____/____/____/____/____ remote control #6
A B C D A+B C+D A+C B+D
[717] ____/____/____/____/____/____/____/____ remote control #7
A B C D A+B C+D A+C B+D
[718] ____/____/____/____/____/____/____/____ remote control #8
A B C D A+B C+D A+C B+D
REMOTE CONTROL ASSIGNMENT
Enter the appropriate section and press any button on an Omnia remote control (OMN-RCT1) twice, or until the confirmation
beep sounds (“Beep-Beep-Beep-Beep-Beep”), to assign the remote control. If you hear a rejection beep, an error has
occurred or the remote control has already been assigned. To delete a remote control, enter the appropriate section and then
pr ess the [FORCE] button.
Section # Remote Control
[731] REMOTE CONTROL #1
[732] REMOTE CONTROL #2
[733] REMOTE CONTROL #3
[734] REMOTE CONTROL #4
[735] REMOTE CONTROL #5
[736] REMOTE CONTROL #6
[737] REMOTE CONTROL #7
[738] REMOTE CONTROL #8
Please note that the User Code
assigned to the remote control
(sections [701] to [708]) must
have the same User Options and
Button Options enabled. For example,
if you enable th e For ce Ar ming button
option you must enable the
appr op riate For ce Ar ming user option .
Al so, if you enable any of the Panic
button options, you must enable the
Panic options in the control panel.
To Next Page
Loading...
