Settings – offers the different setting features.
Please see the Setting Menu details at the following pages.
Info - The DG/RC information (software version, ID, etc.) or the runtime of the DG will be
displayed.
Press and release the M button at the standard display and select Info using the (+)/(-)
and left/right buttons. Press/release button M escape/return to the standard display.
Pressing and releasing E button opens the Info’s submenu. Left/Right buttons can be
used to toggle between About Laser, Runtime and Radio.
Press and release E to show the Laser (Serial number, Software version, internal
temperature, bubble vial), Runtime (endless counter) or Radio (actual radio channel)
information.
Note: The bubble vial appears after the reference check has been completed and can be
used by technicians for specific tests.
Service – ability to recalibrate level sensors.
Press and release the M button at the standard display and select Service using the
(+)/(-) and left/right buttons.
Press/release button M escape/return to the standard display.
Pressing and releasing E button starts the Z-axis calibration process
at 0%.
The Service submenu offers also access to special features for technicians only.
27
To Next Page
Loading...
