40
Warranty
Trimble warrants the DG813/DG613 to be free of defects in material and workmanship for a period of five
years (DG613G: 3 years). Trimble or its authorized service center will repair or replace, at its option, any
defective part, or the entire product, for which notice has been given during the warranty period. If required,
travel and per diem expenses to and from the place where repairs are made will be charged to the
customer at the prevailing rates. Customers should send the product to Trimble Inc. or the nearest
authorized service center for warranty repairs or exchange, freight prepaid. Any evidence of negligent,
abnormal use, accident, or any attempt to repair the product by other than factory-authorized personnel
using Trimble certified or recommended parts, automatically voids the warranty. Special precautions have
been taken to ensure the calibration of the laser; however, calibration is not covered by this warranty.
Maintenance of the calibration is the responsibility of the user.
The foregoing states the entire liability of Trimble regarding the purchase and use of its equipment. Trimble
will not be held responsible for any consequential loss or damage of any kind. This warranty is in lieu of all
other warranties, except as set forth above, including any implied warranty merchantability of fitness for a
particular purpose, are hereby disclaimed. This warranty is in lieu of all other warranties, expressed or
implied.
To Next Page
Loading...
